Beeper Definitions - Motorola LS4208 Quick Reference Manual

4
Scanning
012345
012345

Beeper Definitions

The scanner issues different beep sequences and patterns to indicate status. The table
below defines beep sequences that occur during both normal scanning and while
programming the scanner.
Beeper Sequence
Standard Use
Low/medium/high beep
Short high beep
4 long low beeps
5 low beeps
Lo/hi/lo beep
Hi/hi/hi/lo beep
Parameter Menu Scanning
Short high beep
Lo/hi beep
Hi/lo beep
012345
012345
Power up.
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error was detected in a scanned symbol.
The data is ignored. This occurs if a unit is not properly
configured. Check option setting.
Conversion or format error.
ADF transmit error.
RS-232 receive error.
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel" scanned, wrong
entry, incorrect bar code programming sequence; remain
in program mode.
Keyboard parameter selected. Enter value using bar code
keypad.
Indication
LS4208