Set Defaults; Scanning Modes - Motorola LS4208 Quick Reference Manual

Quick Reference Guide
Programming Bar Codes
Following are some frequently used programming bar codes.

Set Defaults

Scan SET DEFAULTS to set all parameters to their default values.

Scanning Modes

Scan the appropriate bar code below to determine the scanning pattern.
• SINGLE LINE ONLY - No up and down scan line movement (no raster).
• MULTI-LINE SMART RASTER - The scan line begins as a single line and moves up
and down (rasters) when a partial scan of a bar code is detected, or no bar code is
decoded 500 ms after the trigger is pulled.
• MULTI-LINE ALWAYS RASTER (default) - Rastering (up and down scan line
movement) begins immediately.
MULTI-LINE SMART RASTER
For additional host types, refer to the LS4208 Product
NOTE
Reference Guide, p/n 72E-69413-xx, available on the LS4208 CD, or
on the Symbol website: http://www.symbol.com/manuals.
SET DEFAULTS
MULTI-LINE ALWAYS RASTER (Default)
SINGLE LINE ONLY
7