Performax 240-3688 Operator's Manual page 13

Laser On/Off Switch: Press the laser switch
to turn the dual laser lines on and off .
Work light On/Off Switch: Press the work
light switch to turn the work light on and off .
On/Off trigger switch and safety lock-off
button: Press the Lock-off button to
disengage the lock, and then pull the ON/
OFF trigger switch to turn the saw on .
Miter-angle scale: marked in 1° increments,
from 0° to 50° left and 55° right . Positive miter
stops are positioned at 0°, 15°, 22 .5°, 31 .6°,
and 45° for exact cuts at these common
angles .
bevel-angle scale: marked in 1° increments
from 0° to 48° left, with 30° marked . Positive
bevel stops are positioned at 0°, 33 .9°, 45˚
and 48˚ for exact cuts at these common
bevels .
Miter locking knob: locks knob locks the
saw table at the desired miter angle,
0° to 50° left or 55° right .
No-load Speed
Arbor Size
Sliding Length
Base width
Cutting Capacity
90° Crosscut
45° Miter cut
45° Bevel cut
45° Miter/Bevel cut
OVERVIEW
SPECIFICATIONS
Motor
Blade
Laser
Weight
Miter-detent
releases the table from a miter detent .
bevel Locking lever: securely locks your
compound miter saw at the desired bevel
angle .
NOTICE: It is necessary to specially adjust
the 48° left bevel angle.
Upper sliding fence/ Lower moveable
fence: adjusts for added precision .
Self-Retracting Lower blade Guard: made
of shock-resistant,
provides protection from each side of the
blade . It retracts over the upper blade guard
as the blade is lowered into the work piece .
Hold-down Clamp: may be on left or
right fence or base to securely clamp the
work piece .
Carrying Handle:
transporting the saw .
15 AMP, 120V~60Hz
5,000 RPM
10" (25 .4 cm) (40-tooth)
5/8" (15 .9 mm)
635 nm, ≤1 mW, Class II
8" (205 mm)
18 1/2" (47 cm) without extension table
3-1/2" x 11-3/8"
3-1/8" x 8-3/8"
1-3/4" x 12"
1-3/4" x 8-3/8"
38 lbs . 9 oz . (17 .5 kg)
Locking lever: locks
translucent
For carrying
or
plastic,
and
Page 12