Packaging And Components - Buderus SB735 Series Installation And Maintenance Manual

Packaging and Components

2 Packaging and Components
The complete product is shipped in the following
components:
– Boiler vessel, bolted on transport woods
– Supply manifold, packaged with hydronic control
package
– Technical documentation, secured to the boiler
– VE insulation rings for burner and PVC condensate
drain (Siphon) secured to the boiler
– Boiler jacket panels and installation components,
packaged in a wooden crate and cardboard. The
assembly components are located in Pack A.
– The insulation blankets are packaged in 2 plastic
bags.
– A sound attenuating boiler base is supplied standard
with the SB735/1200 model.
– Electronic control panel, in cardboard box (optional).
– A condensate neutralization package can be ordered
separately.
– Hydronic control package, consisting of aquastat,
low water cut-off, relief valve and temperature
pressure gauge (when ordered from Buderus).
– Gas burner and gas train components, if ordered
from Buderus.
– Pre-cut burner mounting plate, if ordered from
Buderus.
Above mentioned components may differ slightly based
on the particular boiler model.
We reserve the right to make any changes due to technical modifications!
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
2
5