Display The Calendar; Setting The Alarm Time; Activating The Alarm; Silencing The Alarm - Springfield 91455 Instruction Manual


If no buttons are pressed within 20 seconds, the unit will revert to the normal time display.

In any setting mode you can press the CHANNEL button to revert to the normal time display.
Note: Use the MODE button to scroll through the various displays. Starting from the normal time
display, press MODE to view alarm time 1, alarm time 2, countdown timer, return to normal time. If the
display is in any mode other than normal time and no buttons are pushed, within 20 seconds the LCD
display will revert to the normal time display.

Display the Calendar

In normal display mode, press the SET button once to display the time with seconds, press SET again to
display the date, press SET again to return to the normal time display.

Setting the Alarm Time

Two different alarm times can be set, Alarm 1 and Alarm 2.

To set Alarm 1; In normal time mode, press the MODE button once and the Alarm 1 time and icon
(A1) will show.

Press the SET button for 2-3 seconds until the alarm hour flashes.

Press UP or DOWN to set the alarm hour.

Press SET and the minutes will be flashing.

Press UP or DOWN to set the alarm minutes.

Press SET to return to normal time display.

To set Alarm 2; In normal time mode, press MODE twice and the Alarm 2 time and icon (A2) will
show.

Follow the same setting sequence as for Alarm 1.

Activating the alarm

In the normal time display, press the MODE button to choose the alarm (A1 or A2) that you want to
activate. Press SET to activate (the alarm bell icon and 1 or 2 will show). The alarm will sound at the
time you have entered.

Silencing the Alarm


When the alarm sounds press any button on the front of the base station to silence the alert or press
the SNOOZE button on the back of the unit to activate the snooze function.

When snooze is activated the Zzz symbol will appear and the alarm will sound again in 5 minutes.

When the alarm sounds again, press SNZ to continue the snooze function or press any button on the
front of the base station to discontinue snooze.

The alarm icon will remain on the display and the alarm will sound every day at the pre-set time until
the alarm is de-activated.

De-activating the Alarm

To de-activate the alarms, press the MODE button to choose the alarm (A1 or A2) that you want to de-
activate. Press the SET button until the alarm bell icon is no longer showing. Your alarm time settings
will remain and you can re-activate the alarms by following the instructions above.

Min/Max Memory


Press the MAX/MIN button once to display the highest indoor and outdoor temperatures recorded
since last reset. MAX is shown on the display.

Press MAX/MIN a second time to display the lowest indoor and outdoor temperatures recorded since
last reset. MIN is shown on the display.

To clear and reset the max/min records, when either the MAX or MIN record is shown on the LCD
display, press and hold MAX/MIN for 2-3 seconds until the beep sounds.