Notes; Locating The Base Station And Remote Sensor; Operating Instructions - Springfield 91455 Instruction Manual

Notes:


Always replace all batteries at the same time; do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.

For maximum performance in normal conditions we recommend using good quality alkaline batteries.
When temperatures are below 0°F, alkaline batteries can lose power resulting in a loss of remote
transmission. If you reside in an area that experiences frequent temperatures near or below 0°F, we
recommend using lithium batteries to minimize the loss of transmission.
NOTE: please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the
batteries if the thermometer or remote sensor will not be used for a long period of time.

Locating the Base Station and Remote Sensor


Choose a suitable place for the base station and remote outdoor sensor, within the transmission
distance.

Place the base unit near a window, but away from direct sunlight or sources of heat or air
conditioning to ensure accurate temperature readings.

The remote sensor is water resistant, but not waterproof. Locate the sensor out of direct sunlight, in
an area where it will not be exposed to rain, snow or ice.

The location you choose is critical for maximizing the transmission range. The remote sensor is
designed to transmit up to 100 ft. unimpeded. Transmitting through walls, metal doors and metal
framed windows may reduce the transmission range. To optimize the transmission distance, the
remote should be positioned in a location that minimizes these obstructions. Interference from other
sources such as home security systems, wireless doorbells and wireless home entertainment
equipment may interrupt the transmission signal temporarily.

In areas of extreme low temperatures, re-locate the remote sensor indoors. Plug the sensor wire into
the remote and route the wire through a nearby window. Be sure to plug in the wire securely. The
sensor wire is not included with the unit and can be purchased separately by contacting
Customer Service at 1-866-843-3905.

OPERATING INSTRUCTIONS

12/24 Hour Clock Selection
In the normal time display mode, press the DOWN 12/24 button to display the time in 12 hour or 24 hour
format. (In 12 hour format AM or PM will show at the left of the time).
Setting Time and Date
Note: When setting the current time or alarm time, press and hold the UP or DOWN button for fast
setting.

Press the SET button for 2-3 seconds until the hour is flashing.

Press UP or DOWN to set the hour.

Press SET and the minutes will be flashing.

Press UP or DOWN to set the minutes.

Press SET and the month will be flashing.

Press UP or DOWN to set the month.

Press SET and the date will be flashing.

Press UP or DOWN to set the date.

Press SET and the year will be flashing.

Press UP or DOWN to set the year.

Press SET to lock in the settings and return to the normal time display.
Taylor