Wireless multi-zone digital thermometer with radio controlled clock (8 pages)
Summary of Contents for Springfield 91455
Page 1
WIRELESS MULTI-ZONE DIGITAL THERMOMETER WITH ALARM CLOCK Model No. 91455 SF Version Instruction Manual FEATURES AND SPECIFICATIONS BASE STATION Indoor / outdoor RF temperature Monitors temperature at up to 4 locations (additional sensors required) Indoor / outdoor temperature displayed in °F or °C ...
Page 2
Temperature tolerance: +/- 2°F (+/- 1.1°C) Table top or wall mount Requires (2) AAA batteries SET/AL ON/OFF DOWN 12/24 RESET SNOOZE ALERT BATTERY INSTALLATION AND SETUP Position the remote sensor near the base station. Open the battery compartment at the back of the base station and insert (2) AAA batteries according to the polarity markings.
Page 3
Notes: Always replace all batteries at the same time; do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries. For maximum performance in normal conditions we recommend using good quality alkaline batteries. When temperatures are below 0°F, alkaline batteries can lose power resulting in a loss of remote transmission.
Page 4
If no buttons are pressed within 20 seconds, the unit will revert to the normal time display. In any setting mode you can press the CHANNEL button to revert to the normal time display. Note: Use the MODE button to scroll through the various displays. Starting from the normal time display, press MODE to view alarm time 1, alarm time 2, countdown timer, return to normal time.
Page 5
Setting the Temperature Alerts You can program your weather center to sound an alert whenever the indoor or outdoor temperature exceeds the upper or lower pre-set level. The outdoor alert can be set for all remote channels. Setting the Indoor Temperature Alert ...
Need help?
Do you have a question about the 91455 and is the answer not in the manual?
Questions and answers
Does the 91455 thermometer remote sensor take batteries. If so, how do l access?