Operation; Operation Overview; Starting The Instrument - GE EPS 3501 XL Operating Instructions Manual

4 Operation

4.1 Operation overview

The operation of the EPS 3501 XL is described in the following sequence.
1
2
3
Programming and running are discussed in more detail in the following sections.
Blinking characters in the display are shown as bold characters in this manual.

4.2 Starting the instrument

Turn on the instrument by pressing the Power switch to the I position.
When the power supply is turned on, the display shows the start position in SET mode.
The previous program set is shown and that program number is blinking.
If the power supply is turned on for the first time or if the program has been cleared, (see
Optional programming‚ on page 34) the default way of controlling is step ( ), the
breakpoint parameter is time (h), the alarm is off and the values are all zero.
Electrophoresis Power Supply EPS 3501 XL Operating Instructions 28-9639-69 AA
Programming or editing a method.
Editing a method.
Running a method.
SET: 1 1
0 V 0mA
0:00h
0 W
Operation 4
Operation overview 4.1
27