Operation; Overview; Programming A Method - GE EPS 3501 XL User Manual

5 Operation

5 Operation
12
5.1

Overview

The operation of the EPS 3501 XL is described in the following sequence.
1. Programming or editing a method.
2. Editing a method.
3. Running a method.
Programming and running are discussed in more detail in the following two sections.
Blinking characters are shown as bold characters.
5.2

Programming a method

Fig 3 summarizes this operation.
Start position
When the power supply is switched on, the display shows the start position in SET mode.
The previous program set is shown and that program number is blinking.
If the power supply is switched on for the first time or if the program has been cleared,
see section 5.5, the default way of controlling is step ( ), the breakpoint parameter is
time (h), the alarm is off and the values are all zero.
SET: 1 1
0 V 0mA
Choosing a program
Up to nine programs, each with up to nine phases, can be entered. Press SET ENTER to
confirm the program shown by the number on the display or use /  keys to choose
another. Confirm with SET ENTER.
Electrophoresis Power Supply EPS 3501 XL User Manual 18-1130-22 Edition AD
0:00h
0 W