NEC i-Series Quick Reference Manual page 3

Alphanumeric Display
es and tells you about your calls. With
al Caller ID, a ringing line may show
aller's number and name.
302
1 2 3
R
K 6 7 8
2 3 4
8 9 10
14 15 16
20 21 22
1 2 3
4 5 6
8 9
7
0
VOL
dsfree
lets you place and answer calls by pressing
ust have a speakerphone to have Handsfree.
itor lets you place a call without lifting the handset, but you must lift the handset to speak.
Automatic Handsfree, you can press a line or Line Appearance key without lifting
ndset. You may have to lift the handset to speak, depending on whether you have
sfree or Monitor. Normally, you have Automatic Handsfree.
Handsfree Answerback
d your phone — without lifting the handset.
helps you use
STA 302
4 5
9 10
5 6
11 12
17 18
23 24
DIAL CALL 1
LND CALL 2
MIC DND
SPK
HOLD
Handsfree Options
to answer a voice-announced Intercom call by speaking
Press a One-Touch Key
contact with co-workers and outside callers,
or when using certain features. Ask your
communications manager.
These are
See Programming Function Keys for more on
setting up these keys.
DIR
Press or dial
list of names. See Directory Dialing for more.
Line Appearance Keys
for placing and answering calls. If you're busy
on one – just use the other.
Do Not Disturb
Enable
when you don't want to be interrupted.
Handsfree
Press for
handset instead. See Handsfree Options below.
While on a handset call, press SPK once for
Handsfree; twice for
Microphone
The
Handsfree calls. Press
microphone.
instead of using the handset.
for one-button
and/or
D
(3) to select a call from a
are Intercom keys
to block your calls
calls, or use the
Group Listen.
picks up your voice for
MIC
to turn off the
keys.