D-Link DKVM-16 Manual page 15

Using the DKVM-16
Hot Key Commands
Note:
1. If you have already set up the scan mode command, DKVM-16 will issue
one beep to confirm each hop from one PC port to the next.
2. To exit Auto Scan Mode, press any key or the SPACE bar.
This screen will appear on your monitor
Note: The Rom reflash command will take approximately 1-2 minutes.
This screen will appear on your monitor
Note: The Search PC name command starts with the 1st PC port.
(Continued)
(Continued)
15