Operation; Volume - JBL SCS136 Owner's Manual

OPERATION

Move the Master Power
switch (marked "Power" ¡)
•
to the " " (On) position to use
the subwoofer. The SCS136
subwoofer will automatically
turn on or go into standby
(sleep) mode when left in the
auto mode ("Auto/On" switch
HIGH LEVEL
+ – – +
L R
OUT
IN
IMPORTANT: CONNECT STRIPED WIRE TO RED ( ) SPEAKER TERMINAL.
SUB 136
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

VOLUME

Subwoofer
Level
MIN MAX
Subwoofer
Level
MIN MAX
™ in the "Auto" position).
When your receiver or ampli-
fier is off, or is not sending
program material to the sub-
woofer, the subwoofer will be
in standby mode (LED will be
red). When the subwoofer
senses an audio signal, it will
LINE LEVEL IN
L
LFE
AUTO
R
GREEN: ON
RED: STANDBY
+
POWER
™
SUBWOOFER
LEVEL
£
ON
MIN MAX
¡
AC 120V~60Hz
Volume may be adjusted
using the Subwoofer Level
control
automatically turn on (LED will
be green). If the subwoofer
does not sense a signal after
approximately twenty minutes,
it will automatically go back
into standby mode.
When the "Auto/On" switch
™ is switched to the "On"
position, the subwoofer will
remain on, whether or not
program material is playing.
If you will be away from home
for an extended period of time,
or if the subwoofer will not
be used, switch the Master
Power switch ¡ to the Off
position.
£
as shown.
9