JBL SCS-SAT500 Owner's Manual

JBL SCS-SAT500 Owner's Manual

Surround cinema speakers

Advertisement

THANK YOU FOR CHOOSING JBL
For more than 60 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to
the recordings you play in
your home, car or office.
We're confident that the JBL
speaker you have chosen will
provide every note of enjoy-
INCLUDED
ment that you expected –
and that when you think
about purchasing additional
audio equipment for your
home, car or office, you will
once again choose JBL.
Please take a moment to
®
register your product on our
Web site at www.jbl.com.
It enables us to keep you
One SCS SAT500, one SCS SAT300
or one SCS SAT200 with wall-mount
bracket, shelf stand and floor stand
adapter.
One 40' (12m) speaker cable.
In addition, there are two hardware
bags included. Hardware Bag A
contains the metal tightening bar and
screw for the shelf stand. Hardware
Bag B contains screws for the floor
stand adapter and parts for the
wall-mount bracket.
posted on our latest advance-
ments, and helps us to better
understand our customers
and build products that meet
their needs and expectations.
JBL, Inc.
SURROUND CINEMA
SPEAKERS
SCS SAT500
SCS SAT300
OWNER'S GUIDE
SCS SAT200
®

Advertisement

Table of Contents
loading

Summary of Contents for JBL SCS-SAT500

  • Page 1 THANK YOU FOR CHOOSING JBL For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL...
  • Page 2: Specifications

    SPEAKERS SCS SAT500, SCS SAT300, MODELS: SCS SAT200 Bring the thrill of live performance DESIGN GOAL: and movie sound to the home environment by calling on JBL’s professional engineering leadership. Titanium-laminate-dome tweeter, SATELLITE TYPE: sealed enclosure PROFESSIONAL REFERENCE: Loudspeaker Series...
  • Page 3: Speaker Placement

    SPEAKER PLACEMENT FRONT SPEAKERS † Placement for back speakers. † Placement for surround back speaker in a 6.1 system. The SCSSAT500, SCSSAT300 and the SCSSAT200 loud- speakers are designed to be used either singly or in a pair to upgrade a 5.1-channel home theater system to a 6.1- or 7.1-channel system, when connected to a com-...
  • Page 4 JBL disclaims any liability for the selection of suitable floor stands and/or correct compatibility between the selected stand and these satellite loudspeakers.
  • Page 5: Wall Mounting

    JBL disclaims any liability for the selection of mounting hardware and/or bracket installation. Be sure to follow these...
  • Page 6: Speaker Connections

    (+) and (–) terminals. Most manufacturers of speakers and electronics, including JBL, use red to not to cross-thread. The swiveling ball enables you to aim the speaker to one side or the other, or to tilt it up or down.
  • Page 7: System Connection

    SYSTEM CONNECTION Connect each speaker to the corresponding speaker terminals on your receiver or amplifier. If you are using a subwoofer, follow the directions in that owner’s guide to connect and configure it. Left Front – Surround – Left Surround –...
  • Page 8: Troubleshooting

    If the problem has followed the speaker, con- sult your dealer for further assistance or, if that is not possible, visit www.jbl.com. If the system plays at low volumes but shuts off as volume is increased: • Check all wires and con- nections between receiver/ amplifier and speakers.

This manual is also suitable for:

Scs sat500Scs sat200Scs sat300

Table of Contents