Device Behavior In Modes 8 Or 9; Mode Indication After Power On - Bosch LE10 Addendum

LE10 Radio Receiver
3

Device behavior in modes 8 or 9

3.1

Mode indication after power on

–
–
3.2 Mode 8
Standby
–
–
–
–
When a S37 transmitter, S35 transmitter, RAC contact,
ManDown Sensor or Smoke Detector are activated:
–
–
–
–
When a N46 transmitter's red or blue button is pressed, or
when one of its inputs is activated:
–
–
–
Bosch Security Systems
When the power supply is connected to the LE10 Radio
Receiver, the green LED will light up permanently for 2
seconds. Afterwards, the device will display the current
mode through the green LED, by blinking as many times as
the number of the mode. The green LED will then light up
permanently.
Example: In mode 8, the green LED will blink 8 times.
When changing the mode, all programmed transmitters will
be deleted.
The green LED stays permanently on.
The red LED is off.
Relay 1 is switched off.
Relay 2 is switched off.
The green LED stays permanently on.
The red LED turns on for 2 seconds.
Relay 1 is switched on for 2 seconds.
Relay 2 is switched off.
The green LED stays permanently on.
The red LED and Relay 1 switch on for 6 minutes or until
the green button of the N46 transmitter is pressed.
Relay 2 is switched off.
Device behavior in modes 8 or 9 | en
User Manual F.01U.139.675 | V1.2 | 2012.09
7