Brother MFC-J470DW Quick Start Manual page 19

For Wireless Network Users
16
Choose your wireless setup method
The following instructions will offer three methods for setting up your Brother machine on a wireless network. If
you began the wireless setup from step 7 on page 7, go to method b or c. For all other users, choose the method
you prefer for your environment.
Method a is the recommended way to connect (Windows
a
Setup using the CD-ROM (Windows
• It is recommended that you use a computer wirelessly connected to your network for this method.
• A USB cable might be needed in some cases.
Now go to
b
Manual setup from the control panel using the Setup Wizard (Windows
mobile devices)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,
write down the wireless network settings of your wireless access point/router in the area below.
If you need assistance during setup and want to contact Brother Customer Service, make sure
you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating
this information.
Item
SSID (Network Name)
Network Key*
* The Network Key may also be described as the Password, Security Key or Encryption Key.
NOTE
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information?
1) Check the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer's name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
Now go to
®
or Macintosh).
®
and Macintosh)
Record the current wireless network settings
page 21
®
, Macintosh and
page 22
19