Camera Setting; Aha Setting - Alpine ICS-X8 Supplementary Manual

01GB00ICS-X8.book Page 9 Tuesday, June 4, 2013 10:33 AM
Application Setup

Camera Setting

Setting the Camera Input
This unit has two options: direct connection and AUX connection.
Setting item: Direct Camera
Setting contents: Off (Initial setting) / Rear
Setting item: AUX Camera
Setting contents: Off (Initial setting) / Rear / OTHER
Rear: Rear camera
OTHER: Side camera, Room camera, etc.
• When set to "OTHER," a camera icon appears on the Home screen.
• If "Direct Camera" is set to "Rear," "AUX Camera" cannot be set to
"Rear." Also, if "AUX Camera" is set to "Rear," "Direct Camera"
cannot be set to "Rear. "
Setting the AUX Camera Signal Input
When the AUX camera is connected, the video input signal type can be
chosen.
Further setting item: Camera Signal
Setting contents: NTSC (Initial setting) / PAL
NTSC/PAL: Choose the video input signal type manually.
Setting the Camera Interrupt
Even when the unit is powered off, the monitor will display the rear
view behind the vehicle when the gear lever is shifted to the reverse
position.
Setting item: Interrupt (PowerOFF)
Setting contents: On (Initial setting) / Off
• Rear camera can only be operated to display the rear view.
• When the gear lever is shifted out of reverse, the unit turns off.

Aha Setting

Touch [aha] on the Application setup menu in step 3. Refer to Owner's
Manual "Application Setup Operation" (page 46).
Setting the Presets View
You can switch between views on the station selection screen.
Setting item: Presets View
Setting contents: Icon (Initial setting) / List
01GB02ICS-X8.fm
MirrorLink™ Setting
Touch [MirrorLink] on the Application setup menu in step 3. Refer to
Owner's Manual "Application Setup Operation" (page 46).
Media Control button Setup
Media Control button setup is performed for the Mirror mode/Car
mode. Set "On" to enable the Media Control buttons.
Setting item: Media Control button Setup
Setting contents: Off / On (Initial setting)
1
Touch [Media Control button Setup].
The Media Control button Setup screen is displayed.
2
Touch [ ] or [ ] to set to On or Off.
• The Guide Display of a mode set to "Off," is not displayed.
ALPINE ICS-X8 68-25285Z40-A (EN)
EN
DE
FR
ES
IT
SE
NL
RU
PL
9
-EN