Introduction; Parts List - Bosch MIC Series Installation Manual

16 en | Introduction
2

Introduction

The MIC Series power supplies from Bosch Security Systems,
Inc. provide all connections for power, telemetry and video for
the MIC Series range of PTZ cameras. Each power supply has
CE and FCC approval and is rated to IP65. The following table
summarizes the power supplies and their functions:
MIC-240PSU-UL
MIC-IR-240PSU-UL
MIC-115PSU-UL
MIC-IR-115PSU-UL
MIC-24PSU-UL
MIC-IR-24PSU-UL
NOTICE!
Use the MIC-2M-S, MIC-10M-S, MIC-20M-S and MIC-25M-S
Shielded Composite Cables with the MIC power supplies for
correct EMC protection.
2.1

Parts List

Each power supply is contained within a cast aluminium
enclosure and comes with the following:
–
–
–
–
–
–
F.01U.141.598 | 1.0 | 2009.11
A weather resistant (IP65) cast aluminium box pre-fitted
with three (3) cable glands.
A power supply for a MIC Series camera.
Provision for driving various interface cards mounted
internally to the power supply box, for example an alarm
interface card (Non-IR power supplies only).
Provision for a signal interface card (BP-3 or BP-4) to
connect telemetry to Bosch Biphase equipment.
Screw termination of all composite, telemetry and ancillary
cables in the box.
Earth isolation and termination within the unit to correctly
control video earthing and to prevent earth loop.
Installation Manual
240 VAC MIC Power Supply
240 VAC MIC IR only Power Supply
115 VAC MIC Power Supply
115 VAC MIC IR only Power Supply
24 VAC MIC Power Supply
24 VAC MIC IR only Power Supply
MIC Series Power Supplies
Bosch Security Systems, Inc.