Table of Contents
Advertisement
PERFECTLY BALANCED SENSOR
ONE-STEP BUTTONHOLE
The Exclusive SEWING ADVISOR
best buttonhole and stitch settings for your fabric. Fabric
should be interfaced and/or stabilized where buttonholes are
to be sewn.
You can also select your buttonhole directly from the
Buttonhole Menu B.
: Woven medium and stabilizer.
FABriC
: Woven medium fabric and Buttonhole.
seleCt
: Size 80 needle as recommended.
use
1. Snap on the Sensor One-Step Buttonhole Foot.
2. Plug the cord into the socket to the left above the needle
area.
3. Place your button on the buttonhole ruler on the
baseplate.
4. Set the size of the button in mm on your screen.
Before sewing, line up the white area on the side of the wheel
with the white marking line on the foot.
When sewing, your machine automatically sews the buttonhole
long enough to fit the selected button size.
The buttonhole size needed will vary with the thickness and
style of your button. Always stitch a sample buttonhole on
scrap fabric first.
Note: For woven heavy and leather, the Exclusive SEWING
ADVISOR
feature selects buttonholes that should not be sewn with
™
the Sensor One-Step Buttonhole Foot.
Sew the Buttonhole:
•
Fold fabric in two and place stabilizer inbetween.
Mark the buttonhole placement on your fabric with a
PICTOGRAM
Pen. Set the length of the button size.
™
•
Place fabric under Sensor One-Step Buttonhole Foot. The
measurement wheel can be raised by lifting it, which makes
it easier to place the fabric under the presser foot.
Note: Use the markings on the left toe of the Sensor One-Step
Buttonhole Foot to position the garment edge. Place the edge of the
garment at the middle mark to have 5/8'' (15 mm) from the edge to the
buttonhole.
•
Step on the foot control. The Sensor One-Step
Buttonhole Foot lowers automatically. A straight stitch
is sewn away from you stabilizing the left buttonhole
column, then the satin column is sewn toward you. This is
repeated for the right column. The bartacks are automatic
(see illustration 1). Keep the foot control depressed until
the Selective Thread Cutter cuts the threads and the
Sensor One-Step Buttonhole Foot is raised.
4:14
feature will select the
™
Place fabric edge here to place buttonhole
5/8'' (15 mm) from edge
1. Sewing direction for satin stitch buttonholes sewn with
the Sensor One-Step Buttonhole Foot
Advertisement
Table of Contents
