Dss Console; Dss Buttons - Toshiba DKT3000 Series User Manual

DSS Console

The Direct Station Selection (DSS)
console operates alongside of a digital
telephone to provide 60 additional
buttons. The 3000-series telephone
requires a 3000-series DSS; the 2000-
series telephone requires a 2000-series
DSS. A DDSS3060 example is shown
right. The DDSS2060 (not shown)
looks similar and has the same button/
LED functions.
The 60 flexible feature buttons can be
assigned as CO line, extension, DSS,
One Touch Speed Dial or any other
flexible feature.
The DDSS3060 console uses dual red
and green LEDs to indicate call and
feature status.
Button numbers in the above
Note
figure are examples only.

DSS Buttons

DSS buttons can appear on both the DADM and DSS Console. Each DSS button is
associated with a particular station in your telephone system. DSS buttons can transfer
an outside call to the associated station or make a direct call to the associated station.
The DSS LED lights steady red when the station associated with the DSS button is
ringing, busy on a call, or when the associated station is idle, but all appearances of the
station's extensions are busy or in-use by other stations. When the associated DSS
button is in the Do Not Disturb mode, the LED blinks red at a slow rate.
DSS buttons cannot call station Phantom extension numbers, Distributed Hunt Group
Directory Numbers, or ACD Groups. DSS buttons may be configured as One Touch
Buttons that may be programmed to call these destinations.
The LED colors described in this section apply to the DADM3020 and DDSS3060.
Described Flash conditions apply to all DSS console models and the DADM.
Strata CTX DKT3000/2000-Series Telephone 10/02
DADM/DSS Console
209 219 229 239
208 218 228 238
207 217 227 237
206 216 226 236
205 215 225 235
204 214 224 234
203 213 223 233
202 212 221 232
201 211 221 231
200 210 220 230
DSS Console
249 NT
248 AC
247 257
246 256
245 255
244 254
243 253
242 252
241 251
240 250
2039
79