Test Mode; Other Modes - Colorado time systems Counting Clock Pro User Manual

Counting Clock Operation

Test Mode

Equipment required:
Set up:
Operation:

Other Modes

4
climber touches the finish pad, the clock will display the finish time
alternating between minutes and seconds (MM:SS) and seconds and
hundredths (SS.HH).
A start input or a double click from the pushbutton will reset and
start the clock any time the running time is displayed.
Mode 16
Depends upon testing.
Follow specific instructions from CTS customer service representa-
tive.
The clock displays 16, indicating mode 16. It will then cycle through
a digit test. Note that the decimal after the third digit is never used,
and will not light during the digit test.
Input ports can also be tested. When an input port receives a signal
the clock shows which input port was triggered, as shown:
Touchpad PAd
Relay Platform rJP
Start StAr
Reset/Breakout rSET
Modes 3 -- 15
All other modes are not used. The clock displays the mode number,
and then displays nA.