Counting Clock Operation; Five Minute Countdown; Speed Timer - Colorado time systems Counting Clock Pro User Manual

Five Minute
Countdown
Equipment required:
Set up:
Operation:

Speed Timer

Equipment required:
Set up:
Operation:

Counting Clock Operation

Mode 1
Launch pad and pushbutton
Connect the launch pad to the Start System jack, and the pushbutton
to the Reset / Breakout jack.
The clock displays 01, indicating mode 1. After about 3 seconds, the
display will show 5:00. The clock will begin counting down when
the climber leaves the launch pad.
The horn will sound for 1 second when the clock reaches zero. Dou-
ble-clicking the pushbutton will stop the horn if it is sounding.
Reset the clock to 5:00 by double-clicking the pushbutton.
Mode 2
Launch pad and finish pad
Connect the launch pad to the Start System jack, and the finish pad
to either Touchpad jack (it doesn't matter which one).
The clock displays 02, indicating mode 2. After about 3 seconds, the
display will show only the colon and rightmost decimal.
When the climber leaves the launch pad, the clock will begin count-
ing up, displaying seconds and tenths (SS.T). Once the running time
is above a minute, the time is shown as minutes and seconds
(MM:SS). Hundredths continue to be recorded, and when the
Counting Clock Operation
2
3