The Reset Button - ZyXEL Communications VSG1432 Setup Manual

802.11n wireless vdsl2 4-port gateway
Hide thumbs Also See for VSG1432:
Table of Contents

Advertisement

None of the LEDs are on if the Device is not receiving power.
Table 1 LED Descriptions
LED
POWER
ETHERNET
LAN 1-4
ETHERNET
WAN
USB
DSL WAN
INTERNET
WLAN/WPS

1.7 The RESET Button

If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to the default.
Make sure the POWER LED is on (not blinking and not red or flashing red).
1
VSG1432 User Setup Guide
COLOR
STATUS
DESCRIPTION
Green
On
The Device is receiving power and ready for use.
Blinking
The Device is self-testing.
Red
On
The Device detected an error while self-testing, or there is a
device malfunction.
Off
The Device is not receiving power.
Blinking
Firmware upgrade is in progress.
Green
On
The Device has a successful 100 Mbps Ethernet connection with
a device on the Local Area Network (LAN).
Blinking
The Device is sending or receiving data to/from the LAN at 100
Mbps.
Off
The Device does not have an Ethernet connection with the LAN.
Green
On
The Gigabit Ethernet connection is working.
Blinking
The Device is sending or receiving data to/from the Gigabit
Ethernet link.
Off
There is no Gigabit Ethernet link.
Green
On
The Device recognizes a USB connection.
Blinking
The Device is sending/receiving data to /from the USB device
connected to it.
Off
The Device does not detect a USB connection.
Green
On
The DSL line is up.
Blinking
The Device is initializing the DSL line.
Off
The DSL line is down.
Green
On
The Device has an IP connection but no traffic.
Your device has a WAN IP address and the DSL connection is
up.
Blinking
The Device is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged
mode.
Green
On
The wireless network is activated.
Blinking
The Device is communicating with other wireless clients.
Green
Blinking
The Device is setting up a WPS connection.
and
Orange
Off
The wireless network is not activated.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents