Procedure - Dell XPS 2720 Owner's Manual

Procedure

1 Remove the screws that secure the I/O-board assembly to the middle cover.
2 Gently lift the I/O-board assembly from the middle cover and turn the I/O-board
assembly over.
3 Press the securing clip and disconnect the power-port cable.
4 Note the routing of the power-supply indicator cable and disconnect the cable from
the power-supply unit.
5 Lift the I/O-board assembly off the chassis.
1 power-supply indicator cable
3 power-port cable
5 I/O-board assembly
68
| Removing the I/O-Board
1
2 securing clip
4 screws (9)
2
3
4
5