Audio And System Preference - JVC XV-S62SL Instructions Manual

3HQJIP 3DJH  7KXUVGD\ 0D\     30
Initial settings
PROGRESSIVE MODE
You can select the
progressive mode from the
following options.
• AUTO
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.
• VIDEO 1
Suitable for playing back a video source disc with
static (inactive) pictures.
• VIDEO 2
Suitable for playing back a video source disc with
dynamic (active) pictures.
• FILM
Suitable for playing back a film or progressive source
disc.
• SMART
Used to playback a disc containing both video and
film source materials. The unit recognizes the picture
type according to the current data.
* Normally, set the PROGRESSIVE MODE to "AUTO" .
* Some DVD discs may not be played back correctly
with the "AUTO" mode. If the playback picture is
unclear or noisy with a particular DVD Video disc, try
to change the mode.
NOTE
• When playing back a film-source DVD Video disc with
the "PROGRESSIVE MODE" set to "FILM" , "SMART" or
"AUTO" and the progressive scan mode is active,the
PROGRESSIVE indicator on the front panel lights. (See
page 15.)

Audio and system preference

The PREFERENCE 2 display handles preferences
" "
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit's digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
• PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
46
• STREAM/PCM
PREFERENCE1 PREFERENCE2
MENU LANGUAGE ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE OFF
ON SCREEN LANGUAGE ENGLISH
• DOLBY DIGITAL/PCM
ON
ON SCREEN GUIDE
MONITOR TYPE 4:3 LB
PROGRESSIVE MODE AUTO
SELECT KEY
The following chart shows the relationship between
types of playback discs and output signals.
Playback discs
DVD with
48/44.1 kHz,
16 bit linear PCM
DVD with
48/44.1 kHz,
20/24 bit linear
PCM
DVD with 96 kHz,
linear PCM
DVD with DTS
DVD with Dolby
Digital
DVD with MPEG
multichannel
Video CD
Audio CD
Audio CD with DTS DTS bitstream 44.1 kHz,
CD -R/RW with
MP3
* With some DVD VIDEO discs that are not fully copy-
PREFERENCE1 PREFERENCE2
STREAM/PCM
DIGITAL AUDIO OUTPUT
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER MODE 1
AV COMPULINK MODE DVD 1
SELECT KEY
Should be selected when you connect to the digital
input of an amplifier with a built-in DTS, Dolby Digital,
or MPEG multichannel decoder.
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
Output
DOLBY
STREAM/
DIGITAL/
PCM
PCM
48/44.1 kHz,
16 bit,
stereo linear
PCM
48/44.1 kHz,
16 bit, stereo
linear PCM*
48 kHz, 16 bit,
stereo linear
PCM*
DTS bitstream 48 kHz, 16 bit,
stereo linear
PCM*
Dolby Digital
bitstream
MPEG 48 kHz, 16 bit,
bitstream stereo linear
PCM
44.1 kHz,
16 bit, stereo
linear PCM
44.1 kHz,
16 bit,
stereo linear
PCM
16 bit, stereo
linear PCM
No output
protected, a 20 or 24 bit digital signal may be output.
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers.
PCM ONLY
+ +
+ +
+ +
+
48 kHz, 16 bit,
+
stereo linear
PCM*
+
+ +
+ +
+
+ +