Audio And System Preference - JVC XV-S65GDJ Instructions Manual

Initial settings
PROGRESSIVE MODE
You can select the
progressive mode from the
following options.
• AUTO
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.
• VIDEO 1
Suitable for playing back a video source disc with
static (inactive) pictures.
• VIDEO 2
Suitable for playing back a video source disc with
dynamic (active) pictures.
• FILM
Suitable for playing back a film or progressive source
disc.
• SMART
Used to playback a disc containing both video and
film source materials. The unit recognizes the picture
type according to the current data.
* Normally, set the PROGRESSIVE MODE to "AUTO" .
* Some DVD discs may not be played back correctly
with the "AUTO" mode. If the playback picture is
unclear or noisy with a particular DVD Video disc, try
to change the mode.
NOTE
• When playing back a film-source DVD Video disc with
the "PROGRESSIVE MODE" set to "FILM" , "SMART" or
"AUTO" and the progressive scan made is active,the
PROGRESSIVE indicator on the front panel lights. (See
page 15.)

Audio and system preference

The PREFERENCE 2 display handles preferences
" "
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit's digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
• PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
46
PREFERENCE1 PREFERENCE2
MENU LANGUAGE ENGLISH
AUDIO LANGUAGE ENGLISH
SUBTITLE OFF
ON SCREEN LANGUAGE ENGLISH
ON
ON SCREEN GUIDE
MONITOR TYPE 4:3 LB
PROGRESSIVE MODE AUTO
SELECT KEY
PREFERENCE1 PREFERENCE2
DIGITAL AUDIO OUTPUT STREAM/PCM
Lo/Ro
DOWN MIX
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER MODE 1
DVD 1
AV COMPULINK MODE
SELECT KEY
• STREAM/PCM
Should be selected when you connect to the digital
input of an amplifier to a built-in DTS, Dolby Digital, or
MPEG multichannel decoder.
• DOLBY DIGITAL/PCM
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
Output
Playback discs
STREAM/
PCM
DVD with 48 kHz, 48 kHz,16 bit,
16 bit linear PCM stereo linear
PCM
DVD with 48 kHz, 48/44.1 kHz,
20/24 bit linear 16 bit, stereo
PCM linear PCM*
DVD with 96 kHz, 48 kHz, 16 bit,
linear PCM stereo linear
PCM*
DVD with DTS DTS bitstream 48 kHz, 16 bit,
DVD with Dolby Dolby Digital
Digital bitstream
DVD with MPEG MPEG
multichannel bitstream
Video CD 44.1 kHz,
16 bit, stereo
linear PCM
Audio CD 44.1 kHz,16
bit,
stereo linear
PCM
Audio CD with DTS DTS bitstream 44.1 kHz,
CD -R/RW with No output
MP3
* With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers.
DOLBY
DIGITAL/ PCM ONLY
PCM
+ +
+ +
+ +
stereo linear
+
PCM*
48 kHz, 16 bit,
stereo linear
+
PCM*
48 kHz, 16 bit,
stereo linear
+
PCM
+ +
+ +
16 bit, stereo
+
linear PCM
+ +