Ip Https Authentication - Intel SBCEGBESW10 CLI Manual

AAA Commands
Parameters
•
method1 [ method2 ...] — Specify at least one method from the following list:
Keyword
local
none
radius
tacacs
Default Configuration
The local user database is checked. This has the same effect as the command ip http
authentication local .
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return
an error, specify none as the final method in the command line.
Example
The following example configures the HTTP authentication.
Console(config)# ip http authentication radius tacacs local none

ip https authentication

The ip https authentication Global Configuration mode command specifies
authentication methods for HTTPS server users. To restore the default configuration, use
the no form of this command.
Syntax
ip https authentication method1 [ method2 ...]
no ip https authentication
14 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
Description