How To Use Your Suunto M9I; Display; Mode Indicator; Battery Indicator - Suunto M9i User Manual

Mobile accessory for boaters
Table of Contents

Advertisement

2. When the battery level indicator is full, disconnect the cable from the PC. Your
Suunto M9i is now ready for use.
NOTE: Heavy use of the GPS, backlight and compass will significantly reduce the
battery life.
WARNING
This Suunto product contains a Li-ion battery. To reduce the risk of fire or burns, do
not disassemble, crush, puncture, short external contacts, or dispose of in fire or
water. Only replace with manufacturer specified batteries. Recycle or dispose of
used batteries properly.

2. HOW TO USE YOUR SUUNTO M9i

2.1 DISPLAY

2.1.1 Mode Indicator

On the left side of the display there is a mode indicator that shows the currently active
mode. The mode indicator displays the modes from the top down in the following order:
TIME, WEATHER, COMPASS, SAILING and NAVIGATION. The active mode is indicated
by the moving segment next to the indicator bar. When the RACING mode is active, both
the SAILING and the NAVIGATION segments are displayed.

2.1.2 Battery Indicator

On the right side of the display there is a battery indicator
that shows the battery voltage. When the indicator is in the
red zone, the battery needs recharging. When the battery
is being recharged, the battery indicator moves up
continuously until the battery is full, and the indicator is
shown in full length.
7

Advertisement

Table of Contents
loading

Table of Contents