Table of Contents
Advertisement
3.7 RACING MODE
The Racing mode is a main mode reserved for racing functions, and can only be
activated in the Sailing and Navigation modes. The main display of the Racing mode
changes according to the race situation.
3.7.1 Main Display
Before starting the race, Suunto M9i asks you to set the
parameters for the start line, race timer and wind direction.
Before the parameters have been set in the Function menu,
the following is displayed:
Set Startline: The first row prompts to set the start line.
Set Timer: The second row prompts to synchronize the
timer.
Set Wind dir: The third row prompts to save the wind direction.
NOTE: When the Navigation is on, an indicator is displayed
on the left side of the lower horizontal dot line of the display.
To set the parameters in the Function menu, short press Enter
in the Racing mode's main display. (For information on the
Function menu before the race, see section 3.8.)
After you have set the parameters, the following is displayed:
Distance to start line (dsl): The first row displays the distance to the start line.
Timer: The second row displays the time left to the start.
Time to start line (tsl): The third row displays the time left to cross the start line
based on current speed, and heading.
The Info display shows the line bias (wind deviation from the
perpendicular line to the start line) with corresponding time
(minutes) before start and favorable side of the line. P means
wind is biased to port side and S means starboard.
Press Start/data to access info display.
Press Start/data, Enter or Stop/cancel to return to main display.
39
Advertisement
Table of Contents
