Table of Contents
Advertisement
2. Change the status to On or Off with the arrow buttons and short press Enter. The
GPS is now set.
NOTE: GPS is set on automatically 15 minutes prior to start.
Course
Synchronizing or starting the timer
To synchronize or to start the timer:
NOTE: The timer starts running when enter is pressed and the unit enters the function
42
The Suunto M9i allows to load 10 different race courses into
the memory. These courses have the unique ability to store
the same waypoint (buoy) several times, into the waypoint
list.
If exact buoy positions are not known, updating the location
of a certain buoy also updates all the same buoys in the
waypoint list. This is helpful when going around the buoys
multiple times. The Suunto M9i can thus calculate layline and
other information related to the buoys once their exact location
has first been updated (see Suunto Sail Manager Help).
The user can select a course from the Suunto M9i memory.
To select a course:
1. In the Function menu, scroll to Course with the Arrow
buttons and short press Enter.
2. Select a course with the arrow buttons and short press
Enter.
mode.
1. In the Function menu, scroll to Timer sync and short press
Enter. The time field is activated.
2. Change the time with the arrow buttons and short press
Enter. The message "
return to the Function menu.
The timer will show the time from the instant when enter was
pressed to enter the function mode.
TIMER SYNCHRONIZED
" is displayed and you
Advertisement
Table of Contents
