Changing The Suunto M9I Settings - Suunto M9i User Manual

4.2.2 Changing the Suunto M9i Settings

Click the M9i panel on the bottom left corner of the display. The Suunto M9i settings tab
will open in the center of the display. After modifying the following settings click update
wristop.
- Clock (12h, 24h)
- Date (mm.dd, dd.mm)
- Altitude (m, ft)
- Temperature (C, F)
- Pressure (hPa, inHg)
- Distance (km, mi, nm)
- Short Distance (n/a, m, ft, yd)
- Speed (km/h, m/s, mph, kt)
- Wind unit (m/s, kt)
- Position (deg, dm)
- Info (off, on)
- Tones (off, on)
- Datum (WGS84 etc.)
- UTC Offset
Select the correct time zone in relation to Greenwich time.
- Fixrate
Define how often the Suunto M9i displays updates of GPS-related information. You
can set different fixrate for normal and race use.
- Log interval
Every x:th fix is saved in the Suunto M9i memory. You can set different log intervals for
normal and race use.
- UKHO Information, Pin code and User Permit
The values are saved in the Suunto M9i and cannot be edited. The information is
needed when purchasing ARCS charts.
53