Selecting Siren Default; Setting The Clock - Scorpio MotoSecure SR-i900 Series User Manual

Selecting Siren Default

Enter programming mode. Scroll to the
LCD will display the current setting. To program follow these steps:
Press button 1 to
scroll between the
options

Setting the Clock

Enter the programming mode. Scroll to the time and press button 1 to select. The screen will display
time with the hour flashing. To program follow these steps:
Press button 2 to
Press button 1 to
toggle between
adjust each
digits
digit
Clock only displays in 24 hour format (Military time)
Note.
11
icon and press button 1 to enter the siren menu. The
Press
button 2 to
– Siren will sound and turn
save and
signals will flash every time alarm is
exit
triggered
– Siren will not sound and
turn signals will not flash every time
alarm is triggered
Press
button 2
pass last
digit to
save
RCS (Range Confirmation Signal)
If the transceiver is within range of the MCM and the alarm is activated, the LCD will display
If the transceiver does not receive the RCS; the icon will not appear.
Checking Violation Display with Time Stamp
If no alarm triggers in memory, all
sensor icons will be displayed
Press button
1 twice
quickly
Press button 1 to scroll
between triggers
Or, press and hold button 2 for
two seconds to erase memory.
icon.
If the system was triggered, the last triggered
sensor will be displayed
Trigger # Total # of Time of trigger
Triggers
16