BMW Z4 sDrive30i Owner's Manual page 66

4. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol ap‐
pears in the display.
5. Press button 2.
6. Use button 1 to select one of the following:
▷ The function is deactivated.
▷ ... Select the corresponding
duration, 40 seconds, for instance.
7. Press button 2.
The setting is stored for the remote control cur‐
rently in use.
Automatic headlamp control
Switch position : the low beams are switched
on and off automatically depending on the am‐
bient light, e.g., in tunnels, in twilight or if there
is precipitation. The LED next to the symbol
lights up.
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
Personal responsibility
The automatic headlamp control cannot
serve as a substitute for your personal judgment
in determining when the lamps should be
switched on in response to ambient lighting
conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks, you
should always switch on the lamps manually un‐
der these conditions.◀
Daytime running lights
The daytime running lights light up in posi‐
tion 0, and . After the ignition is
66
Online Edition for Part no. 01 41 2 604 213 - 03 10 500
switched off, the parking lamps light up in posi‐
tion .
Activating/deactivating
Operating principle, refer to page
1. Switch on the ignition.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the symbol
appears in the display, accompanied by the
word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the symbol
appears in the display.
5. Press button 2.
6. Use button 1 to select one of the following:
▷ Daytime running lights are acti‐
vated.
▷ Daytime running lights are de‐
activated.
7. Press button 2.
The setting is stored for the remote control cur‐
rently in use.
59.