BMW Z4 sDrive30i Owner's Manual page 60

4 Calling up Check Control 63
5 Checking the engine oil level 122
6 Initializing the Flat Tire Monitor 72
Resetting the Tire Pressure
7 Setting the time 61
8 Setting the date 61
9 Viewing service requirement display 62
Exiting displays
The outside temperature reading and the time
reappear when you press button 2 or if you make
no entries within approx. 15 seconds. If required,
complete the current setting first.
Formats and units of measure
You can set formats and units of measure.
1. Switch on the ignition, refer to page
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the symbol
appears in the display, accompanied by the
word "SET".
3. Press button 2.
4. Use button 1 to select desired format or de‐
sired unit of measure, e.g., for fuel consump‐
tion.
▷ Fuel consumption: l/100 km, mpg,
km/l
60
Online Edition for Part no. 01 41 2 604 213 - 03 10 500
10 Setting formats and units of measure, re‐
setting to factory settings 60
11 Changing settings
▷ Confirmation signals when locking and
Monitor 73.
▷ Response during unlocking proce‐
▷ Automatic locking 25
▷ Headlamp courtesy delay feature 65
▷ Daytime running lights 66
▷ Triple turn signal activation 47
▷ Seat memory* 38
▷
▷
▷
▷
44.
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2. The setting is stored for the
remote control currently in use.
Resetting to factory settings
You can reset the settings for formats and units
of measure to factory settings.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the symbol
unlocking the vehicle 23
dure 22
Distance: km, mls
Time: 12h, 24h
Date: day.month dd.mm, month/day
mm/dd
Temperature: ℃, ℉