BMW Z4 sDrive30i Owner's Manual page 23

Do not lock the vehicle from the outside if there
are people in it, as the vehicle cannot be un‐
locked from inside without special knowledge.◀
Convenient closing*
When you are close to the vehicle, the remote
control for Comfort Access can be used to close
the retractable hardtop and the windows.
Press and hold the button on the remote
control.
The retractable hardtop and the windows are
closed.
Monitor the closing process
Monitor the closing process to ensure that
no one becomes trapped.
Releasing the button stops the motion.◀
Switching on the interior lamps,
courtesy lamps*, and welcome lamps
Press the button on the remote control
with the vehicle locked.
Unlocking the trunk lid
Press the button on the remote control for
approx. one second.
During opening, the trunk lid pivots back and up.
Ensure that adequate clearance is available be‐
fore opening.
To avoid locking yourself out of the vehicle, do
not place the remote control into the trunk. A
previously locked trunk lid is locked again after
closing.
Before and after each trip, check that the trunk
lid has not been inadvertently unlocked.
Convenient loading*
When you are close to the vehicle, the remote
control for Comfort Access can be used to par‐
tially raise the open hardtop for more convenient
loading of the trunk.
1. Briefly press the button on the remote
control.
Press again within one second and hold until
the retractable hardtop stops in an inter‐
Online Edition for Part no. 01 41 2 604 213 - 03 10 500
mediate position. The trunk lid opens
slightly.
2. Open the trunk lid, press the cargo area par‐
tition upward and stow the cargo in the
cargo area.
3. Press down the cargo area partition until it
engages on both sides and close the trunk
lid.
4. Press the button on the remote control
for an extended period to fold the retractable
hardtop back in.
Confirmation signals from the vehicle
Operating principle, refer to page
1. Switch on the ignition, refer to page
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the symbol
appears in the display, accompanied by the
word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator
lever down repeatedly until the desired sym‐
bol appears in the display.
▷ Confirmation signal during unlocking
▷ Confirmation signal during locking
59.
44.
23