BMW Z4 sDrive30i Owner's Manual page 148

1 2 Cause
DBC failed. No power braking support during
emergency braking.
The brake is overheating.
High brake load.
Indication in US models
Brake pads worn.
Indication in Canadian models
Brake pads worn.
Lights up in red:
The starter has failed.
Ignition malfunctioning. The engine can only
be restarted when the brake is depressed.
Lighting system failed. Low beams/tail lamps
and brake lights still operational. All other
lamps failed.
Lights up in yellow:
Brake light control failed.
The fuel supply is malfunctioning.
Flashing:
Dynamic Stability Control DSC or Dynamic
Traction Control DTC is controlling
braking forces, refer to page
148
Online Edition for Part no. 01 41 2 604 213 - 03 10 500
How to respond
You can continue your journey,
but moderate your speed and ex‐
ercise due caution. Have the sys‐
tem checked as soon as possible.
Allow the brake to cool down. You
can continue your journey, but
moderate your speed and exer‐
cise due caution.
You can continue your journey,
but moderate your speed and ex‐
ercise due caution.
Have the condition of the brake
pads checked without delay.
Have the condition of the brake
pads checked without delay.
Have the system in question
checked immediately.
The engine cannot be restarted.
Depress the brake to restart the
engine.
You can continue your journey,
but moderate your speed and ex‐
ercise due caution. Have the sys‐
tem in question checked immedi‐
ately.
drive and
77.