Set Tone Or Pulse Dialling Mode; Set The Telephone Line Type - Brother MFC-8370DN Quick Start Manual

9
Enter personal
information (station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Menu.
b
Press 0.
c
Press 3.
d
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
e
Enter your telephone number (up to 20 digits)
on the dial pad, and then press OK. If your
telephone number and fax number are the
same, enter the same number again.
f
Use the dial pad to enter your name (up to 20
characters), and then press OK.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the last character, press
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
cursor to the incorrect character, press
Clear/Back.
Press One Two
key time times
2 A B
3 D E
4 G H
5 J K
6 M N
7 P Q
8 T U
9 W X
For more details, see Entering Text in the
User's Guide.
g
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step a.
to
or to move the
Three Four Five
times times times
C 2 A
F 3 D
I 4 G
L 5 J
O 6 M
R S 7
V 8 T
Y Z 9
10
Set tone or pulse dialling
mode
a
Press Menu.
b
Press 0.
c
Press 4.
d
Press or to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
11
Set the telephone line
type
a
Press Menu.
b
Press 0.
c
Press 6.
d
Press or to choose PBX, ISDN or
Normal.
Press OK.
Do one of the following:
If you choose ISDN or Normal, go to step h.
If you choose PBX, go to step e.
e
Do one of the following:
If you want to change the current prefix
number, press 1 and go to step f.
If you do not want to change the current
prefix number, press 2 and go to step h.
Note
The default setting is "!". When you press Tel/R,
"!" will be displayed on the LCD.
f
Enter the Prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
You can use the number 0 to 9, #,
Tel/R to display "!".)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall, press Tel/R to enter the break.
and !. (Press
l
7