Sony Bravia KDL-52EX1 Operating Instructions Manual page 31

Media Receiver Set-up
Auto Start-up
Region
(Australian model only)
Screen Settings
PC Settings
You can run the initial set-up that appeared when you first connected the unit
(page 7), and select the region (Australian model only) and tune in all available
channels again. Even if you have made the settings when you first connected the
unit, you may need to change the settings after moving house, or to search for
newly launched channels.
Sets the region in which you will operate the unit.
Wide Mode See "To change the Wide Mode manually" on page 21.
Auto Wide
Automatically changes "Wide Mode" according to the input
signal. To keep your setting, select "Off".
4:3 Default Selects the default Wide Mode for use with 4:3 broadcasts.
Wide Zoom
Normal
Off
Display Area Adjusts the picture display area in 1080i/p and 720p sources
when "Wide Mode" is set to "Full".
Auto
Full Pixel
Normal
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture when "Wide
Mode" is set to "Wide Zoom", "Zoom" or "14:9".
Vertical Size
Adjusts the vertical size of the picture when "Wide Mode" is
set to "Wide Zoom", "Zoom" or "14:9".
Wide Mode Selects "Wide Mode" for displaying input from your PC.
Full 1
Full 2
Reset
Resets the PC screen settings to the factory settings.
Auto Adjustment Automatically adjusts the display position, phase and pitch of
the picture when the unit receives an input signal from the
connected PC.
z
• "Auto Adjustment" may not work well with certain input
signals. In such cases, manually adjust "Phase", "Pitch" and
"Horizontal Shift".
Phase Adjusts the phase when the screen flickers.
Pitch Adjusts the pitch when the picture has unwanted vertical
stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Power Switches the unit to standby mode if no signal is received for
Management 30 seconds in the PC input.
Displays conventional 4:3 broadcasts
with an imitation wide screen effect.
Displays conventional 4:3 broadcasts in
the correct proportions.
Keeps the current "Wide Mode" setting
when the channel or input is changed.
During digital broadcasts, displays
pictures in accordance with the settings
recommended by the broadcast station.
Displays pictures in their original size.
Displays pictures in their recommended
size.
Enlarges the picture to fill the vertical
display area, keeping its original
horizontal-to-vertical aspect ratio.
Enlarges the picture to fill the display
area.
(Continued)
31
GB