Advertisement
Installing the sound bar (continued)
4
Screw the wall mount angle to the wall as shown in
the illustration. (Total screw is 4 pieces)
Wall mount angle
(screws x 2)
Wall surface
(screws x 2)
5
Align the wall mount slot at the sound bar to the
wall mount angle.
6
Slot the sound bar into the wall mount angle.
7
Fix them securely.
Wall surface
Note:
Make sure all screws are fully tightened. (screws are not
supplied)
Falling prevention
Safety wires (not supplied) are useful to prevent the sound
bar from falling off the table.
Loop the safety wires (not supplied) into each hole as
shown and tie the safety wires to the LCD TV stand.
2012 January 31
Wall
mount
angle
E-9
HT-SL72 / HT-SL77
Installing the TX-BOX
1
Make a hole in the wall using a drill.
3/8" (8 - 9 mm)
2
Fix a wall mount plug into the hole using a
hammer, until it is flush with the wall surface.
3
Fix screws into the wall for the speaker, as
shown in the illustration.
●
Make sure that the screw and the wall can support
a load of 45 lbs (20 kg).
●
Fix the screws, so the screw head extends about
7/32" (5.5 mm) from the wall.
Wall mounting
Wall surface
screw
4
Tighten the screws. Hook the TX-BOX on the
screw heads and make sure it is properly secured.
Wall surface
1-1/4" (32 mm)
7/32"
(5.5 mm)
Wall surface
1
2
3
4
5
6
7
1
9
9
Advertisement
