Fog Control; Strobe Control; Audio Sensitivity Knob - Chauvet Obey 40 User Manual

Fog Control

The Obey™ 40 D-Fi™ 2.4 has a dedicated fog button that will work with compatible
CHAUVET® fog machines. See the CHAUVET® website for available fog machines:
www.chauvetlighting.com.
To operate one or more fog machines, do the following:
1. Connect the fog machines to the fog control out port on the back panel.
Note: See the fog machine's User Manual for information on linking more than one
fog machine.
2. Turn on the fog machine or machines.
3. Wait for the <Fog> LED to come on.
4. Press <Fog> to generate fog.
T
he <Fog> LED indicates that the fog machine is at maximum temperature and ready to
generate fog. When the LED is not on, the fog machine might still generate fog, but not for the
maximum rated time.

Strobe Control

The Obey™ 40 D-Fi™ 2.4 has a dedicated strobe button that will work with compatible
CHAUVET® strobes. See the CHAUVET® website for available strobes:
www.chauvetlighting.com.
To operate one or more strobes, do the following:
1. Connect the strobe or strobes to the strobe control out port on the back panel of the
Obey™ 40 D-Fi™ 2.4.
Note: See the strobe's User Manual for information on linking more than one strobe.
2. Turn on the strobe or strobes.
3. Press <Strobe> to start the strobe.
Note: The <Strobe> button is a momentary button. The light will strobe for as long as
the button is held down. When it is not pressed, the strobe is dark.
The LED indicator for the strobe button will flash at the same rate as the strobe.
Audio Sensitivity
The audio sensitivity knob makes the board more or less sensitive to sounds. When the
knob is as far clockwise as it can go, the board is the most sensitive to sound.
Knob
Obey™ 40 D-Fi 2.4 User Manual Rev. 1 Page 35 of 108