Centering - Panasonic Workio DP-C405 Operating Instructions Manual

Centering

The copying image can be centered automatically on a selected paper.
This function can be selected when the original is placed on the Platen Glass.
As the original is placed on the Platen Glass, the position of the original may be erroneously detected if
influenced by ambient light.
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and place original on the Platen Glass,
and then leave the ADF open.
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select "More Menus".
4
Select "Zoom / Effects", and then
select "Centering".
5
Select the desired type of paper, and
then select "OK".
6
Enter the desired number of copies.
7
Press the Start key.
After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
71