Flexible Numbering Plan - LG-Nortel ARIA SOHO Installation Manual

ARIA SOHO Hardware Description and Installation Manual
STARTING THE ARIA SOHO
6.2.3.5 Flexible Numbering Plan (PGM 105)
To set the Flexible Numbering Plan, perform the following Steps:
1. Press the [TRANS/PGM] button + 105.
2. Enter the Station Range (dial the Start and End numbers as described in the Table).
3. Press the [HOLD/SAVE] button to accept changes.
STATION NUMBERS
000 001 002 003
100 101 102 103
000 001 002 003
100 101 102 103
000 001 002 003
100 400 102 103
6.2.3.6 Flexible Numbering Plan (PGM 106-107)
To program Flexible Numbering using PGM 106, perform the following Steps:
1. Press the [TRANS/PGM] button + 106.
2. Enter the desired code (refer to Table).
3. Press the [HOLD/SAVE] button to accept changes.
FLEX
1 Station Group Pilot Number Range
2 Internal Page Zone Number Range
3 Internal All Call Page
4 Meet Me Page
5 External Page Zone
6 All Call Page (Internal/External)
7 SMDR Account Code
8 Flash Command to CO Line
9 Last Number Redial (LNR)
10 Do-Not-Disturb
11 Call Forward
12 Speed Dial Program
13 MSG Wait/Call-Back Enable
NUMBERING PLAN DETAIL
[TRANS/PGM] + 105
Station Number Assign—Four station numbers correspond to the 4 port numbers. The
Station number length is in the range of 2 digits through 4 digits. There are two
methods for changing the station number:
Dial two station numbers – Dial the range of the start and end Station numbers. The
LCD will show the dialed range value. Press the [HOLD/SAVE] button to accept
change. All LEDs of BTNs will be extinguished.
Press one of FLEX 1-4 - Each FLEX button (1-4) is assigned to a corresponding
Station number (1- 4) on the current LCD. The LED of the pressed Flexible button will
show steady light. Dial the new Station number and press the [HOLD/SAVE] button to
accept change, or press another Flexible button to assign a Station number to other
stations without saving.
To change the next 4 station numbers then press [▼] button. If you want to change
previous 4 station numbers, then press [▲] button.
To delete all Station numbers, press the [SPEED] button and press the [HOLD/SAVE]
button; all station numbers will be cleared.
Press the [HOLD/SAVE] button to save changes to the database permanently (Ex:
Press FLEX 2, dial 400 and press [HOLD/SAVE] button).
FLEXIBLE NUMBERING PLAN (PGM106)
ITEM
DESCRIPTION
100-151
620-629
543
544
545
549
550
551
552
553
554
555
556
51
Issue 1
Mar, 2007
DEFAULT VALUE