LG-Nortel ARIA SOHO Installation Manual page 54

ARIA SOHO Hardware Description and Installation Manual
STARTING THE ARIA SOHO
6.2.3.2 Board Assignment (PGM 101)
To use CO line, extension line, and board, first of all if the code of these boards is registered on system at PGM101,
you can normally use the board.
When registering board, if the 4
ARIA System, in case of adding some of boards, if passively assigning those, you can use it. When the 4
(SW1) of the MBU is on and board is automatically registered, you must make the 4
system reset
At Admin programming mode,
1. Press the [TRANS/PGM] button + PGM number (101)
2. Enter slot number (2 digits)
3. Press [FLEX1] button.
4. Enter Board Type code (2 digits)
5. Press the [HOLD/SAVE] button to accept the change.
STA CODE
DPU 11
SLIB16 13
SLIB8 14
HYBRID 17
SLOT NUMBER
01
02
05
06
09
10
th
pole (SW1) of the MBU is on, the board is automatically registered. And while using
COL
LCOB3
SLOT POSITION
Hybrid on BKSU/CKSU
Optional extension slot on BKSU
LCOB on BKSU
Optional LCOB on BKSU
VMIU slot
DPU slot on BKSU/CKSU
FIGURE 6.2.3.2 SLOT LOCATIONS
BOARD ID
CODE
33 VMIU
AAFU
SLOT DEFINITION
HYBRID
HYBRID,SLIB8,SLIB16
LCOB3
LCOB3
VMIU, AAFU
DPU
49
th
pole (SW1) of the MBU off and
ETC CODE
64
65
KINDS OF BOARDS
Issue 1
Mar, 2007
th
pole