2.02 Functional Block Diagrams
Figure 2 illustrates the functional block diagram of the 250TS-power supply.
2.03 Transporting Methods
These units are equipped with a handle for carrying purposes.
ELECTRIC SHOCK can kill. DO NOT TOUCH live electrical parts. Disconnect input
power conductors from de-energized supply line before moving the welding power source.
FALLING EQUIPMENT can cause serious personal injury and equipment damage.
Lift unit with handle on top of case.
Use handcart or similar device of adequate capacity.
If using a fork lift vehicle, place and secure unit on a proper skid before transporting.
Figure 2. 250TS Functional Block Diagram
WARNING 1
WARNING 2
14