Weld Process Selection For Pro-Lite 250Ts - Thermal Arc 250TS DC CC Operating Manual

4.02 Weld Process selection for Pro-Lite 250TS

Weld Process
Selection STICK
STD
SLOPE
REPEAT
SPOT
PULSE ON/OFF
Table 3 – Weld Process selection verses Weld Mode for Pro-Lite 250TS
Weld Mode
HF LIFT
TIG TIG
Yes Yes Yes
No Yes Yes
No Yes Yes
No Yes
No Yes Yes
2T operation in TIG Modes using remote
devices to control contactor & current
4T operation in TIG Modes with crater fill
using a remote contactor device to control
sequence.
4T operation in TIG Modes with repeat
operation and crater fill using a remote
contactor device.
No 2T operation spot welding in HF TIG using
a remote contactor device.
Pulse operation in TIG Modes
25
Description