PRO-WAVE 300TSW
2.06 Functional Block Diagrams
Art # A-05525
2.07 Transporting Methods
These units are equipped with a handle for carrying purposes.
ELECTRIC SHOCK can kill. DO NOT TOUCH live electrical parts. Disconnect input power conductors from
de-energized supply line before moving the welding power source.
FALLING EQUIPMENT can cause serious personal injury and equipment damage.
Lift unit with handle on top of case.
Use handcart or similar device of adequate capacity.
If using a fork lift vehicle, place and secure unit on a proper skid before transporting.
2-4
Figure 2-2: Functional Block Diagram
WARNING
WARNING
August 10, 2005