Panasonic SC-PT170 Operating Instructions Manual page 26

Changing the player settings (continued)
STILL MODE
Specify the type of picture shown when paused.
≥[AUTO]
: The picture is not blurred, but picture quality is
≥FIELD §
lower.
: Overall quality is high, but the picture may
≥FRAME §
appear blurred.
Refer to "Frame still and field still" (
§
VIDEO OUT – SCART
Choose the video signal format to be output from the SCART
(AV) terminal.
≥VIDEO
≥S-VIDEO
≥RGB 1: (Only when connected to a RGB compatible TV)
If you always would like to view the picture from the unit in
RGB signal, select this mode. The TV screen will
automatically switch to display the picture from the unit
when the unit is turned on.
≥[RGB\2]: (Only when connected to a RGB compatible TV)
When in TV tuner mode, if the selector is set to "DVD/CD", the
TV screen will automatically switch to display the picture from
the unit only during disc playback ([DVD-V] [DVD-VR] [VCD]) or
when viewing on-screen menu of DVD/CD.
The TV picture will be displayed when the selector is set to
"AV". With other selectors, the picture from this unit will be
displayed.
AUDIO menu
Select to suit the type of equipment you connected to the
HDMI AV OUT terminal.
Select "BITSTREAM" when the equipment can decode the
bitstream (digital form of 5.1-channel data). Otherwise,
select "PCM".
(If the bitstream is output to the equipment without a
decoder, high levels of noise can be output and may
damage your speakers and hearing.)
DOLBY DIGITAL
§
≥[BITSTREAM]
≥PCM
DTS
§
≥[BITSTREAM]
≥PCM
MPEG
§
≥BITSTREAM
≥[PCM]
When audio is output from HDMI AV OUT terminal, and
§
the connected equipment does not support the item
selected, the actual output will depend on the
performance of this connected equipment.
DYNAMIC RANGE
≥ON: Adjusts for clarity even when the volume is low.
Convenient for late night viewing. (Only works with
Dolby Digital)
≥[OFF]
26
SPEAKER SETTINGS
Select the delay time of the speakers.
(Effective when playing 5.1-channel sound)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If you have to place the center or surround speakers closer
to the seating position, adjust the delay time to make up for
35, Glossary).
the difference.
Circle of constant primary listening distance
If either distance a or b is less than c, find the difference
in the table and change to the recommended setting.
≥SETTINGS:
≥C DELAY (Center Delay):
≥LS/RS DELAY (Left Surround/Right Surround Delay):
≥TEST TONE: SETTING
DISPLAY menu
LANGUAGE
Choose the language for the on-screen messages.
≥[ENGLISH]
≥ITALIANO
≥POLSKI
C
C
L R


  
SW

LS
RS
Approximate room dimensions
LS
RS
a Center speaker
Difference Setting
(Approx.)
30 cm 1ms
60 cm 2ms
90 cm 3ms
120 cm 4ms
150 cm 5ms
[0ms]
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
[0ms]
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
Use the test tone for speaker level adjustments (
Adjusting the speaker output level manually).
≥FRANÇAIS ≥ESPAÑOL
≥SVENSKA ≥NEDERLANDS
: Actual speaker position
: Ideal speaker position
: Primary listening
distance
b Surround speaker
Difference Setting
(Approx.)
150 cm 5ms
300 cm 10ms
450 cm 15ms
15,
≥DEUTSCH