Panasonic SC-PT170 Operating Instructions Manual page 21

To rotate a picture (during pause)
[JPEG]:
0,------. 90,------.180,------.270
ROTATION
^--------------------------------------------J
Menu 2 (Video)
NORMAL
CINEMA1:
PICTURE MODE
CINEMA2:
DYNAMIC:
ANIMATION:
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V]
[VCD]), k2, k4
ZOOM
≥[JPEG]: during pause
If you have chosen "480p"/"576p"/
"720p"/"1080p" (progressive), "1080i"
(interlaced) ["VIDEO FORMAT" in Menu
TRANSFER
4 (HDMI)], select the method of
MODE
conversion for progressive output to suit
the type of material.
≥The setting will return to "AUTO" or
"AUTO1" when the disc tray is
opened, the unit is turned off or
another source is selected.
When playing PAL discs
AUTO:
VIDEO:
FILM:
When playing NTSC discs
AUTO1:
AUTO2:
VIDEO:
When you select "AUTO" the
constructing method of the DivX
contents is automatically distinguished
SOURCE
and output. If the picture is distorted,
SELECT
select "INTERLACE" or
[DivX]
"PROGRESSIVE" depending on which
constructing method was used when the
contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
Mellows images and
enhances detail in dark
scenes.
Sharpens images and
enhances detail in dark
scenes.
Enhances the contrast
for powerful images.
Suitable for animation.
Automatically detects
the film and video
content, and
appropriately converts it.
Select when using
"AUTO", and the content
is distorted.
Select this
if the
edges of
the film
content appear jagged or
rough when "AUTO" is
selected. However, if the
video content is distorted
as shown in the illustration
to the right, then select
"AUTO".
Automatically detects
the film and video
content, and
appropriately converts it.
In addition to "AUTO1",
automatically detects
film contents with
different frame rates and
appropriately converts it.
Select if the video content
is distorted when using
"AUTO1" or "AUTO2".
Menu 3 (Audio)
To make the dialogue in movies
easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel
DIALOGUE
or higher, with the dialogue recorded in
ENHANCER
the center channel)
[DivX] (Dolby Digital, 3-channel or higher,
with the dialogue recorded in the center
channel)
OFF, ON
Menu 4 (HDMI)
To show HDMI information.
HDMI
( below, Confirming HDMI information)
HDMI STATUS
This works when the HDMI connection
is being used with "VIDEO PRIORITY"
( 27, HDMI menu) set to "ON".
HD ENHANCER
To sharpen the "720p", "1080i" and
"1080p" picture quality
OFF, 1 (weakest) to 3 (strongest)
This works when the HDMI connection
is being used with "VIDEO PRIORITY"
( 27, HDMI menu) set to "ON".
VIDEO FORMAT
To select suitable picture quality with
your TV
(Video recordings will be converted to,
and output as, high-definition video.)
480p/576p/720p/1080p
§
(progressive)
480i/576i/1080i (interlaced)
§
≥If the picture is distorted, press
and hold [CANCEL] until the
picture is displayed correctly.
(The output will return to "480p"/
"576p".)
The numbers displayed depend on
§
the disc being played. One of the
above numbers is displayed.
This works when the HDMI connection
is being used with "VIDEO PRIORITY"
( 27, HDMI menu) set to "ON".
COLOUR
SPACE
To select suitable picture colour with
your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
≥If the setting above is not compatible
with your TV, it will not be displayed.
Confirming HDMI information
e.g.
1
CONNECTED STATE
2
AUDIO STREAM
3
MAX CHANNEL
4
VIDEO FORMAT
5
COLOUR SPACE
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 ( above, VIDEO FORMAT)
5 ( above, COLOUR SPACE)
[Note]
When "OFF" is selected in "AUDIO OUT" (
menu), "– – –" will be displayed in "AUDIO STREAM".
HDMI --- INFORMATION
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
27, HDMI
21