Speaker Control; Viera Link Control Only With Tv's Remote Control; (For "Hdavi Control 2 Or Later") - Panasonic SC-PT170 Operating Instructions Manual

Speaker control

You can select whether audio is output from this unit's
speakers or the TV speakers by using the TV menu settings.
For details, refer to the operating instructions for your TV.
Home Cinema
This unit's speakers are active.
≥When you turn on this unit, this unit's speakers will be
automatically activated.
≥When this unit is in standby mode, changing the TV
speakers to this unit's speakers in the TV menu will
automatically turn this unit on and select "AUX"
"D-IN" as the source.
§
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or
mute button on the TV's remote control. (The volume
level is displayed on this unit's display.)
≥To cancel muting, you can also use this unit's remote
control ( 38).
≥If you turn off this unit, TV speakers will be
automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to "0".
–This function works only when "DVD/CD", "USB",
"AUX" or "D-IN" is selected as the source on this
§ §
unit.
≥Audio output is 2-channel audio.
When switching between this unit speakers and TV
speakers, the TV screen may be blank for several seconds.

VIERA Link Control only with TV's remote control

(for "HDAVI Control 2 or later")

You can control the playback menus of this unit with the TV's
remote control. When operating the TV's remote control,
refer to the below illustration for operation buttons.
1 Select this unit's operation menu by using the TV menu
settings.
(For details, refer to the operating instructions for your
TV.)
The START menu will be shown.
e.g. [DVD-V]
or
§
DVD/CD
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Input Selection
Sound
OK
RETURN
≥The START menu can also be shown by using a
button on the TV's remote control (e.g. [OPTION]).
–When "DVD/CD" or "USB" is selected as the source,
the TV's remote control works only during stop
mode.
2 Select the desired item on the START menu (
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu.)
You can operate the playback with the indicated controls.
≥The on-screen control panel can also be shown by
using a button on the TV's remote control (e.g.
[OPTION]).
–This works only during "DVD/CD" or "USB" playback
and resume modes.
If the TV has automatically switched to the HDMI input
mode for this unit (
The TV will automatically switch to TV tuner mode when:
–you press [EXIT] button on the TV's remote control.
–you press [EXIT] or [RETURN] button on the TV's
remote control to exit the START menu.
This does not work during playback or resume mode when
"DVD/CD" or "USB" is selected as the source.
[Note]
≥Depending on the menu, some button operations
cannot be performed from the TV's remote control.
≥You cannot input numbers with the numbered buttons
on the TV's remote control ([0] to [9]). Use this unit's
remote control to select the play list etc.
Home Cinema
Playback/menu access
22, Auto input switching)
13).
23