Advertisement
If there is no rinse-aid w arning light in the control panel, you can judge the amount of rinse-aid by the color of the optical level
indicator "D" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark .As the rinse-aid
diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1 / 4 full.
The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well
as plates, small bowls and shallow pans(as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved
by the spray of water.
The upper rack can be adjusted for height by putting wheels of
different height into the rails.
For the below placement method of Rack, the adjustment position
of Upper Rack must be as below shown on the illustration.
If required,the height of the upper rack can be adjuested in order to creat more space for large utensils either in the upper rack
or lower rack.
The upper rack can be adjusted for height by putting wheels of different height into the rails.
Long items,serving cutlery,salad servers or knives should be placed on the shelf so that they do not obstruct the rotation of the
spray arms. The shelf can be folded back or removed when not required for use.
A measured amount of rinse-aid is released during the final rinse. As with detergent, the amount
of rinse-aid needed for your dishes depends on the hardness of the water in your area. Too much
rinse-aid can result in lather of foaming and cause cloudiness or steaks on your dishes. If the
water in your area is very soft, you may not need rinse-aid. If you do,you can dilute the rinse-aid
with an equal amount of water.
The rinse-aid dispenser has six or four settings. Always start with the dispenser set on " 2 ". If
spots and poor drying are problems, increase the amount of rinse aid dispensed by removing the
dispenserlid and rotating the dial to "3". If the dishes still are not drying properly or are spotted,
adjust the dial to the next highest number until your dishes are spot-free. We suggest you
to set to "4" .(Factory value is "4".)
D
As the rinse aid diminishes, the size of the black dot on the rinse
aid level indi cator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to el iminate spotting
Empty
6
Advertisement
