Service Considerations; Tool And Software Requirements - Compaq 1650 Maintenance & Service Manual

Service Cons.
COMPAQ
| Home Page
Illustrated Parts Catalog

Service Considerations

Listed below are some of the considerations that you should keep in mind during the
disassembly and assembly of the computer.

Tool and Software Requirements

To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Plastic shroud
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends that
all screws removed during disassembly be kept with the part that was removed, then
returned to their proper locations.
As each subassembly is removed from the computer, it should be placed
IMPORTANT:
away from the work area to prevent damage.
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20chec...1600%20SERIES%201650%20and%201655/service.html (1 of 2)6/27/2004 2:52:59 AM
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US |
SEARCH
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Notice | Preface
| Removal & Replacement Procedures
Pin Assignments
| Product Description
| Battery Pack Operations
United States June 27, 2004
| Troubleshooting
| Specifications